Engineering Statics Labs with SOLIDWORKS Motion 2015
by Huei-Huang Lee
About This Book
This book is designed as a software-based lab book to complement a standard textbook in a Engineering Statics course, which is usually taught in junior undergraduate years. There are 8 chapters (164 pages) in this book. Each chapter consists of 2 sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of Engineering Statics. Typically, each section takes 15-30 minutes to complete the exercises.
To order the book, please visit SDC Publications or Amazon.com
Chapter 1 Equilibrium of a Body
(Video 07:15) Sec 1.1 Supported Block: A 2D Case
(Video 05:18) Sec 1.2 Supported L-Plate: A 3D Case
Chapter 2 Trusses
(Video 07:24) Sec 2.1 Plane Truss
(Video 08:34) Sec 2.2 Space Truss
Chapter 3 Frames
(Video 07:23) Sec 3.1 Plane Frame
(Video 04:29) Sec 3.2 Space Frame
Chapter 4 Machines
Chapter 5 Internal Forces in Beams
(Video 06:55) Sec 5.1 Cantilever Beam
(Video 07:08) Sec 5.2 Overhanging Beam
Chapter 6 Cable
(Video 07:58) Sec 6.1 Cable with Point Loads
(Video 03:04) Sec 6.2 Suspending Cable
Chapter 7 Friction
(Video 04:29) Sec 7.1 Block on Floor
Chapter 8 Moments of Inertia
Finished File Sec01-1.zip
Finished File Sec01-2.zip
Finished File Sec02-1.zip
Finished File Sec02-2.zip
Finished File Sec03-1.zip
Finished File Sec03-2.zip
Finished File Sec04-1.zip
Finished File Sec04-2.zip
Finished File Sec05-1.zip
Finished File Sec05-2.zip
Finished File Sec06-1.zip
Finished File Sec06-2.zip
Finished File Sec07-1.zip
Finished File Sec07-2.zip
Finished File Sec08-1.zip
Finished File Sec08-2.zip
View Demo Videos or Download Finished Files
1. The finished files can be opened with SOLIDWORKS 2015 or later versions.
2. It is suggested that, whenever a file is needed to start up an exercise, you use a file provided here, rather than your own finished file, so that the numerical results would be more consistent with those in the textbook.
3. The finished files of a section are compressed into a single file (.zip). Please de-compress them before opening from SOLIDWORKS. When opening an assembly file, if you see a message such as “Unable to locate the file,” simply choose “Browse for file” and relocate the file.
A Free PDF Book by Huei-Huang Lee
Part and Assembly Modeling with SOLIDWORKS 2015
This workbook has 121 pages and is an introductory tutorial to geometric modelings using SOLIDWORKS 2015. It is not intended to be a comprehensive guide to parts and assembly modelings. It is prepared mainly for those students who have no experience in SOLIDWORKS geometric modeling, but want to acquire some.
