(Video) Section 02-1  W16x50 Beam

(Video) Section 02-2  Triangular Plate

(Video) Section 02-4  M20x2.5 Threaded Bolt

(Video) Section 02-5  Spur Gears

(Video) Section 02-6  Microgripper

(Video) Section 03-1  Triangular Plate

(Video) Section 03-2  Threaded Bolt-and-Nut

(Video) Section 03-4  Spur Gears

(Video) Section 03-5  Filleted Bar

(Video) Section 04-1  Beam Bracket

(Video) Section 04-2  Cover of Pressure Cylinder

(Video) Section 04-3  Lifting Fork

(Video) Section 04-5  LCD Display Support

(Video) Section 05-1  Beam Bracket

(Video) Section 05-2  Cover of Pressure Cylinder

(Video) Section 05-4  LCD Display Support

(Video) Section 06-1  Bellows Joints

(Video) Section 06-2  Beam Bracket

(Video) Section 06-3  Gearbox

(Video) Section 07-1  Flexible Gripper

(Video) Section 07-2  3D Truss

(Video) Section 07-3  Two-Story Building

(Video) Section 08-1  Flexible Gripper

(Video) Section 08-2  Triangular Plate

(Video) Section 09-1  Pneumatic Fingers

(Video) Section 09-2  Cover of Pressure Cylinder

(Video) Section 09-3  Convergence of 3D Elements

(Video) Section 10-1  Stress Stiffening

(Video) Section 10-2  3D Truss

(Video) Section 10-3  Beam Bracket

(Video) Section 11-1  Gearbox

(Video) Section 11-2  Two-Story Building

(Video) Section 11-3  Compact Disk

(Video) Section 11-4  Guitar String

(Video) Section 12-2  Lift Fork

(Video) Section 12-3  Two-Story Building

(Video) Section 12-4  Disk and Block

(Video) Section 12-5  Guitar String

(Video) Section 13-2  Translational Joint

(Video) Section 13-3  Microgripper

(Video) Section 13-4  Snap Lock

(Video) Section 14-2  Belleville Washer

(Video) Section 14-3  Planar Seal

(Video) Section 15-2  High-Speed Impact

(Video) Section 15-3  Drop Test

(Finished Project File) Sec 02-1

(Finished Project File) Sec 02-2

(Finished Project File) Sec 02-4

(Finished Project File) Sec 02-5

(Finished Project File) Sec 02-6

(Finished Project File) Sec 03-1

(Finished Project File) Sec 03-2

(Finished Project File) Sec 03-4

(Finished Project File) Sec 03-5

(Finished Project File) Sec 04-1

(Finished Project File) Sec 04-2

(Finished Project File) Sec 04-3

(Finished Project File) Sec 04-5

(Finished Project File) Sec 05-1

(Finished Project File) Sec 05-2

(Finished Project File) Sec 05-4

(Finished Project File) Sec 06-1

(Finished Project File) Sec 06-2

(Finished Project File) Sec 06-3

(Finished Project File) Sec 07-1

(Finished Project File) Sec 07-2

(Finished Project File) Sec 07-3

(Finished Project File) Sec 08-1

(Finished Project File) Sec 08-2

(Finished Project File) Sec 09-1

(Finished Project File) Sec 09-2

(Finished Project File) Sec 09-3

(Finished Project File) Sec 10-1

(Finished Project File) Sec 10-2

(Finished Project File) Sec 10-3

(Finished Project File) Sec 11-1

(Finished Project File) Sec 11-2

(Finished Project File) Sec 11-3

(Finished Project File) Sec 11-4

(Finished Project File) Sec 12-2

(Finished Project File) Sec 12-3

(Finished Project File) Sec 12-4

(Finished Project File) Sec 12-5

(Finished Project File) Sec 13-2

(Finished Project File) Sec 13-3

(Finished Project File) Sec 13-4

(Finished Project File) Sec 14-2

(Finished Project File) Sec 14-3

(Finished Project File) Sec 15-2

(Finished Project File) Sec 15-3

Tutorial Videos and Finished Project Files

1. To reduce file sizes, the project files were compressed in ZIP format.  Decompress a file before it is opened with ANSYS Workbench.

2. The project files are to be used with ANSYS2023 (or later); they are not to be used with ANSYS2022 or earlier versions.

3. It is suggested that, whenever a project file is needed to start up an exercise, you use a project file provided here, rather than your own finished project file, so that your numerical results would be more consistent with those in the textbook.